Five0 "Black-ops" Fuel Injectors for Mazda Miata (Starting at $280)
Five0 "Black-ops" Fuel Injectors for Mazda Miata (Starting at $280)
Five0 "Black-ops" Fuel Injectors for Mazda Miata (Starting at $280)
Five0 "Black-ops" Fuel Injectors for Mazda Miata (Starting at $280)
Five0 "Black-ops" Fuel Injectors for Mazda Miata (Starting at $280)

Five0 "Black-ops" Fuel Injectors for Mazda Miata (Starting at $280)

Regular price $280.00 Sale

Fiveomotorsport introduces the "Black-Ops, M-Series" High-Performance, 
Flow-Matched Fuel Injectors (see complete details and specifications below).

PRICE INCLUDES ONE (1) FUEL INJECTOR WITH ELECTRICAL CONNECTOR (Choose from PIGTAIL, WIRED ADAPTER, or WIRELESS ADAPTER (see drop-down menu and photos for options)

Made in U.S.A.

ULTRA FAST RESPONSE TIMES:CONSISTENT EVEN AT VERY LOW PULSE WIDTHS. LOW DEAD-TIMES ACROSS THE OPERATING VOLTAGE RANGE

  • FREE ELECTRICAL ADAPTERS INCLUDED
  • COMPATIBLE WITH ALL PERFORMANCE FUELS
  • STAINLESS STEEL INTERNAL PARTS
  • NEW: 1300cc Flow Rate Available.

FIVEO & WALBRO FUEL PUMP APPLICATIONS:

FIVEO 00041: 1986-92 7MGE, 2JZGE; 1987-98 7MGTE, 2JZGTE; 1985-93 Celica - ALL; 
FIVEO 00042: 1996-98 7MGE, 2JZGE; 1990-2005 Miata (MX5)
FIVEO Avenger 325: 2006-14 Miata (MX5); 2007-12 Mazdaspeed 3
WALBRO F90000267: Skyline R32/R33/R34;


Fiveomotorsport's new single-hole w/ball & diffuser plate fuel nozzle - WATCH VIDEO.
This new nozzle guarantees a tight cone spray throughout the rpm range. And where it gets really good is at high volume/high rpm and high pressure at boost.
Testing has been completed. Check out the video of the Black-Ops M80 operating at 7,200 rpm and a pulse width of only 2 ms.
Even with the simulated conditions you will still see the super-fine droplets our new single-hole nozzle produces.

This injector can provide a smooth idle quality on engines running all types of performance fuel.

Fuel Injector Specifications:

Fuel Delivery: Single-hole ball valve (for maximum fuel atomization).
Coil Resistance: 12.5 OHMS (high-impedance)
Flow-Matched sets 0.5-1.5% -- guaranteed.
Minimum Pulse Width: 1.4 ms

With your order you will receive a complete flow-data-sheet showing actual tested flow rates for your individual injectors (see photos)
Data sheet includes static flow data at 3 Bar (43.5 psi), 3.5 Bar (50.8 psi) and 4 Bar (58.0 psi). Black-Ops injectors can operate at 100+ psi.
Also included: Dynamic flow data at 3 Bar at 6000 rpm and 5.0 ms and idle data at 800 rpm and 1.5 ms
Full latency (dead-time/offsets) table from 8 volts to 18 volts at 3 Bar

Injector Dimensions:

Electrical connector type: US CAR
Overall length: 72 mm - approx. 2.9 in
Body Diameter: 17 mm - 0.70 in
O-ring to o-ring, on center: 62 mm - approx. 2.5 in
Upper o-ring diameter: 11.5 mm - 0.45 in
Lower seal diameter: 16 mm - 0.60 in
O-ring/seal material: Viton